Clock Setting And Battery Replacing - Malaguti FIREFOX F15 Manual De Uso Y Mantenimiento

6.4 CLOCK SETTING AND BATTERY REPLACING

(A/C)
The clock setting functions are the following:
• Date and month reading. Press the upper button once (time
appears again after a few moments).
• Seconds reading. Press the button twice; to reset the initial
configuration press again the button.
For time and date setting press the buttons on the right side of the
dial.
• Month setting. Press 2 times consecutively the lower button,
then select the number with the upper button.
• Date settin. Press 3 times consecutively the lower button, then
select the number with the upper button.
• Hour setting
Press 4 times consecutively the lower button, then select the
exact digit with the upper button.
• Minute setting
Press 5 times consecutively the lower button, then select the
digits with the upper button.
Battery replacement
• To replace the battery you have to remove the clock holder. Take
the clock out and turn the little cover anticlockwise (A - Fig. 33).
Remove the dead battery out (B) and replace it with an identical
one AG13 or LR43.
• Reassemble the unit in reverse order.
All manuals and user guides at all-guides.com
6.5 TAIL-LIGHT
• To reach the dipped beam/stop light bulbs unloose both screws
(A-Fig. 34) fixing the lens (B). Replace the bayonet bulb (Fig. 34
ref. L) with an identical one (12V/5W - 12V/21W). Then reassem-
ble the lens, paying attention to the wiring cables.
Note: before reinstalling the lens, verify the new bulb correct
operation.
U.S. version
NUMBER PLATE LIGHT
(bulb replacement)
• Unscrew the nuts fixing the
screws (V2) to support (B -
Fig. 34.1).
• Unscrew the lamp body (A).
• Take the bulb out and
replace it with a new
identical one (12V - 5W).
(bulb replacement)
A
B
Fig. 33
EN
L
F
Fig. 34
A
V
2
B
Fig. 34.1
33