6.6 INDICATOR LIGHTS
(bulb replacement)
Front
• Remove the screw (C - Fig. 35.1) then remove the lens and the
orange parabola, by loosening the inside screw.
• Replace the bulb with an identical one: (12V/10W- BA 15S).
• Reassemble the whole unit paying attention to the external lens.
Rear
• Remove the screws (A - Fig. 35).
• Remove the lens of the tail-light. (F - Fig.35)
• Replace the bayonet-joint bulb (12V/10W - BA 15 S) and
reassemble the lens.
EN
WARNING! The failure of one of the four indicators is shown by the
increased blinking of the indicator warning light placed on the
dashboard
.
34
All manuals and user guides at all-guides.com
A
B
F
Fig. 35
C
Fig. 35.1