Tripp-Lite SmartOnline SUTX20K Manual Del Propietário página 9

3. Installation and Wiring
2
Place the UPS over the drilled holes, use the levelers to stabilize the UPS on the ground and use the M6 screws to reinstall the
balance supports (that were removed from the UPS during the unpacking process) on the UPS. Refer to the figure below.
3
Use four user-supplied M8 bolts to fix the four balance supports on the ground to avoid UPS movement.
(Figure 3-3: Balance Support Installation)
(Figure 3-4: Fix the Balance Supports on the Ground)
9
M6 Screw x 8
Balance Support x 4
Balance
Support x 4
Ground
M8 Bolts x 4