Goodyear GY 13RT Manual De Usuario página 73

English • Owner´s manual
Maintenance
EVERY 50 HOURS WORK
1) Change the oil in the mowing bar casing (Fig.8).This
operation must be carried out with the oil hot and the
machine standing on a flat surface. Allow the old oil to flow
out through plug (R) and pour in 0.5 litres of new oil (with the
characteristics indicated on the sticker affixed to the side part
of the casing), through plug (S).
Oil level and change sticker affixed to the side of the mowing
bar casing
2) Grease the mowing bar articulation by means of the
lubricator (T), (Fig. 8).
EVERY 300 HOURS WORK
Fig. 8 - Casing oil fill and drain plug and
1) Change the oil in the mowing bar casing as indicated in the
articulation lubricator.
previous point 1, (Fig. 8).
Technical specifications
- Trasmission in oil bath.
- QUICK COUPLING DEVICE OF THE MOWING BAR
In the PTO coupling zone of the mowing bar, the casing is preset to connect to the quick coupling device
of the walking tractor without the use of rods or wrenches.
- TYPES OF MOWING BAR
Two types of mowing bar are available:
1) Mowing bar for MEDIUM CUT with working widths of 1100 and 1270 mm
2) Mowing bar type E.S.M. with working widths of 1170, 1370 and 1480 mm
Weights
1100 mm "MEDIUM-CUT" bar 1100 mm = 54 Kg
1270 mm "MEDIUM-CUT" bar 1270 mm = 59 Kg
1170 mm "E.S.M." bar = 50 Kg
1370 mm "E.S.M." bar = 54 Kg
1480 mm "E.S.M." bar = 37 Kg
73