5 - MAINTENANCE
5.2.8 Compressor oil chart
AGIP
Dicrea 100
FINA
Eolan AC 100
The oil indicated above (ISO 100) is adequate for temperatures from +5 to +25 °C
For temperatures below +5 °C, use ISO 68 grade oil.
For temperatures above +25 °C, use ISO 150 grade oil.
5.3 Periodic maintenance schedule
WARNING!
For the engine periodic maintenance, see the specific manual provided.
Maintenance
Change the compressor oil
Tighten the head block fixing screws
Check the tightness of all screws
Check the lubricator oil level
Check the level of condensation in the filter bowl
Drain condensation from the air tank
Check the compressor oil level
Clean the air filter element
Run the engine for about two minutes
Change the compressor oil
Change the air filter element
Change the pilot valve / unloader muffler
Check the belt tension
Clean all the external parts of the compressor
Empty the fuel tank and use up the fuel left in the carburettor
6
- DISMANTLING THE MACHINE WHEN NO LONGER USED
6.1 General
The motorcompressor is to be dismantled when no longer used.
The parts are to be disassembled in order to dispose of them as required.
•
Empty the air tank.
•
Remove the oil left in the compressor.
•
Empty the oil lubricator.
•
Divide the disassembled parts according to the material they are made of (metal, plastic, oil, etc.) and dispose of them
following the regulations in force in the country where the machine has been used.
IMPORTANT!
Do not pollute the sewers and the ground with waste oil and solvents.
IP
Calatia 100
CASTROL
Aircol PD100
Corema oil H100
Api
Cm-8x
Rarus 427
SHELL
Exxc olub H100
After the
Every
initial 50
day
hours of
work
X
X
X
X
X
X
MOBIL
Energol CS100
ESSO
Cortusa 100
Every
Every
week
month
X
X
X
BP
TOTAL
At
the end
of every
season
X
X
X
X
X
X
29 - 72