Parts Names - Hiyasu ASE 18UIAM Manual De Funcionamiento

06Manual 26Hiyasu ENG 2/1/07
Indoor unit
3 2
4
Outdoor unit
12
13
Indoor unit Function indicators on indoor unit display panel
1 2
1-
AUTO indicator
This indicator illuminates when the air conditioner is in
AUTO operation.
2-
TIMER indicator
This indicator illuminates when TIMER is set ON/OFF.
3-
PRE.-DEF. Indicator
(For Cooling & Heating models only) This indicator illumi-
nates when the air conditioner starts defrosting automati-
cally or when the warm air control feature is activated in
heating operation.
15:25 Página 45

PARTS NAMES

1
8
5 6 7
9
11
3 4 5
6
Indoor unit
10
1-
Front panel
2-
Air inlet
3-
Air filter
4-
Air outlet
5-
Horizontal air flow grille
6-
Vertical air flow louver
7-
Display panel
8-
Remote controller signal receiver
9-
Remote controller
10-
Manual control button
Display panel
11-
Connecting pipe, drain hose
12-
Air inlet (side and rear)
13-
Air outlet
The operation indicator lights flash rapidly (five times per
second.) when safety protection features come into operation.
Note: All the pictures in this manual are for explanationpurpo-
se only. They may be slightly different fromthe air conditioner you
purchased(depend on model). The actual shape shall prevail.
4-
TEMPERATURE indicator
A) Usually it displays the temperature settings. When
change the setting temperature, this indicator begins
to flash, and stops 20 seconds later.
B) It displays the room temperature when the air conditio-
ner is in FAN only operation.
C) When the unit stops operation, it return to original fac-
tory settings.
D) Displays the malfunction code or protection code.
5-
OPERATION indicator
This indicator flashes after power is on and illuminates
when the unit is in operation.
6-
FREQUENCY indicator
This indicator appears only when the compressor is in
operation and indicates the current operating frequency.
45