Normativas Atendidas - WEG CFW-11M Manual Del Usuario

8.2 DATOS DE LA ELECTRÓNICA / GENERALES (CONT.)
INTERFACE HMI
HOMBRE MÁQUINA ESTÁNDAR
(HMI)
GRADO DE IP00
PROTECCIÓN
CONEXIÓN DE PC CONECTOR USB
PARA
PROGRAMACIÓN

8.2.1 Normativas Atendidas

NORMAS DE
SEGURIDAD
NORMAS DE
COMPATIBILIDAD
ELECTROMAGNÉTICA (EMC)
NORMAS DE
CONSTRUCCIÓN
MECÁNICA
9 teclas: Gira/Para, Incrementa, Decrementa, Sentido de Giro, Jog, Local/Remoto, Soft Key
derecha y Soft Key Izquierda;
Display LCD gráfico;
Permite acceso / modificaciones de todos los parámetros;
Exactitud de las indicaciones:
- corriente: 5 % de la corriente nominal;
- resolución de la velocidad: 1 rpm;
Posibilidad de montaje externa.
USB estándar Rev. 2.0 (basic speed);
USB plug tipo B "device";
Cable de interconexión: cable USB blindado, "Standard host/device shielded USB cable".
UL 508C - Power conversion equipment.
UL 840 - Insulation coordination including clearances and creepage distances for electrical
equipment.
EN61800-5-1 - Safety requirements electrical, thermal and energy.
EN 50178 - Electronic equipment for use in power installations.
EN 60204-1 - Safety of machinery. Electrical equipment of machines. Part 1: General
requirements.
Nota: Para tener una máquina en conformidad con esa normativa, el fabricante de la
máquina es responsable por la instalación de un dispositivo para la parada de emergencia
y un equipamiento para seccionar la red eléctrica.
EN 60146 (IEC 146) - Semiconductor converters.
EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements
- Rating specifications for low voltage adjustable frequency AC power drive systems.
EN 61800-3 - Adjustable speed electrical power drive systems - Part 3: EMC product
standard including specific test methods.
EN 55011 - Limits and methods of measurement of radio disturbance characteristics of
industrial, scientific and medical (ISM) radio-frequency equipment.
CISPR 11 - Industrial, scientific and medical (ISM) radio-frequency equipment –
Electromagnetic disturbance characteristics - Limits and methods of measurement.
EN 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 2: Electrostatic discharge immunity test.
EN 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 3: Radiated, radio-frequency, electromagnetic field immunity test.
EN 61000-4-4 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 4: Electrical fast transient/burst immunity test.
EN 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4: Testing and measurement
techniques - Section 5: Surge immunity test.
EN 61000-4-6 - Electromagnetic compatibility (EMC)- Part 4: Testing and measurement
techniques - Section 6: Immunity to conducted disturbances, induced by radio-frequency fields.
EN 60529 - Degrees of protection provided by enclosures (IP code).
UL 50 - Enclosures for electrical equipment.
Especificaciones Técnicas
CFW-11M | 8-5
8