Quick Start; Unpacking; Opening The Printer; Identifying The Printer Parts - Olivetti JP 90 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

All manuals and user guides at all-guides.com

Quick Start

This section is a rapid guide for installing your printer and
preparing it for use. It contains a sequence of operations
which should be performed in the order described .
More detailed information about the printer and its functions is
given in the User Guide.

Unpacking

Keep the carton and all the packing materials in case you
have to repack or ship the printer.
Carton contents
As well as this instructions manual, the packing carton also
contains the following (see page III):
A) Printer
B) AC/DC adapter
C) Ink jet print head
D) Driver diskettes
If anything is missing or damaged, call your local retailer
immediately.
Instead of the AC/DC adapter supplied, you can use 10
market standard LR6/AA type batteries or either of the
optional NiCd or NiMH battery packs (item 1 on
page IV) to operate your printer (see "Using Batteries"
in the User Guide).
Quick Start

Opening the Printer

To open the printer:
Raise and tip back the top cover).
Extend the paper support, pulling it out to the left and then
rotating it upwards until it is vertical (see figure on page X).
The top cover serves as the input/output tray for the
sheets of paper inserted in/expelled from the printer.
Open the front cover only to access the print head.
Do NOT leave the printer exposed to direct sunlight or
heat sources, or in dusty, dirty or poorly ventilated
environments.

Identifying the Printer Parts

Take a few minutes to identify and locate the principal parts
of your printer
1

Publicidad

Tabla de contenido
loading

Tabla de contenido