Factory Settings - Olivetti JP 90 Manual Del Usuario

All manuals and user guides at all-guides.com
Programmable Printer Features

Factory Settings

When you receive the printer, its basic operating parameters
already have pre-defined factory settings (default settings for
PCL III + emulation). These are the settings which appeared
in the print test the very first time you ran it (see figure on
page XI).
The default settings for each emulation are indicated in bold
in the parameter tables and can be restored by clicking on
Default in the main window of the set-up utility.
Once you have selected your emulation, remember to
check that it is compatible with your application driver,
otherwise your printer will not operate correctly.
The factory settings for PCL III + emulation are:
Feature Default setting
Emulation PCL III DJ500
Font Courier 10 cpi 12 pt Portrait
Paper format Din A4
Character set CP 437 - International
Print quality Letter quality
Ink save mode Text and Graphic
Line terminator Normal (CR=CR; LF=LF; FF=FF)
Perforation skip Perforation skip on
Text scale mode Text scale off
Graphic density 75 dpi
Programmable Printer Features - Factory Settings
The factory settings for EPSON LQ 850 emulation are:
Feature Default setting
Font Sans Serif Upright 10 cpi 12 pt Portrait
Paper format Din A4
Character set USA
Print quality Letter quality
Ink save mode Text and Graphic
Line terminator Auto CR
Slashed zero Off
Print size Normal
Line Feed Length 6 lpi
Word length 8 bits
The factory settings for IBM Proprinter X24 emulation are:
Feature Default setting
Font Letter quality 1 10 cpi 12 pt Portrait
Paper format Din A4
Character set CP 437 International
Print quality Letter quality
Ink save mode Text and Graphic
Line terminator Normal (CR=CR; LF=LF; FF=FF)
Slashed zero Off
Print size Normal
Line Feed length 6 lpi
Alternative Graphic Mode Off
(AGM)
Character table Table 2
A-11