Loading Paper - Olivetti JP 90 Manual Del Usuario

All manuals and user guides at all-guides.com
•
Open the front cover of the printer.
•
With the electrical contacts towards the corresponding
contacts in the housing on the print head carriage, insert
the print head, tilting it towards the contacts and then
pushing it down to fix it in place.
Do NOT push in the print head horizontally; if presented
correctly for insertion, it only needs to be pushed down
gently into place.
•
Close the front cover.
•
Press the CARTRIDGE key to return the print head to its
rest position.
See "Ink Jet Print Head" in the User Guide for further
details on the handling and care of the ink jet print head.
Quick Start

Loading Paper

(See the sequence of figures on page X.)
Make sure the paper support is in its vertical position
(see the section entitled "Opening the Printer").
•
You can load up to 15 sheets of paper in the automatic
sheet feeder (ASF). Fan the sheets thoroughly and make
sure their edges are squared.
•
Press down the movable right guide and position it to
correspond with the paper format indicated at the lower
right edge of the top cover (A4 or US).
•
Align the paper against the left edge of the insertion slot
and insert it until it stops against the feed rollers.
•
To check that the paper feeds correctly:
– Press FORM FEED to insert a sheet of paper to the
first print position (TOF - Top of Form).
– Press FORM FEED again to expel the paper to the
output stacker.
The paper must not be crumpled or torn, otherwise it may
feed crooked and jam, or even not be inserted.
On reception of text to be printed, a sheet will be fed into the
printer to the first print line. If there is no operation for more
than 60 seconds, any paper inserted in the printer will be
expelled.
3