Olivetti JP 90 Manual Del Usuario página 287

All manuals and user guides at all-guides.com
Others
The Others parameter group, available in all three
emulations, contains a series of individual parameters that
affect the layout of your printed document. Where indicated,
the parameter is available only in a specific emulation:
Parameter Value
Line terminator Normal CR=CR; LF=LF;FF=FF
Auto LF CR=CR+LF; LF=LF; FF=FF
Auto CR CR=CR; LF=LF+CR; FF=FF+CR
Auto CR/LF CR=CR+LF;LF=LF+CR;FF=FF+CR
Defines how the printer manages
each end of line.
It is dependent on your
environment.
In EPSON LQ 850 emulation,
there are only two parameter
values: Auto CR and Auto CR/LF
Perforation skip Off Affects only text, introducing a half
( only PCL III + On inch (12.7 mm) no-printing area at
emulation ) the top of each page. In most
cases, Perforation skip mode ON
will meet your requirements.
When Perforation skip mode is
ON , a line that overruns the lower
limit of the text area will be printed
below the top margin of the next
page.
Programmable Printer Features - User-Definable Parameters
Parameter
Perforation skip
(continued)
Function
BOF = 1/2 in
TOF = 1/2 in
Text scale mode
( only PCL III +
emulation )
(continued)
Value Function
Off When Perforation skip mode is
On OFF , the line will be printed on the
first physical print line of the new
page.
ENABLED (ON) DISABLED (OFF)
Page 1
BOF = 1/2 in
TOF = 0
Page 2
Off Affects only text, reducing
On automatically the current Line
Feed setting to maintain a non-
printable area at the foot of the
page (BOF = 12,7 mm) even for
the maximum number of print lines
per page.
Possible ONLY with portrait
orientation selected and the
Perforation Skip feature OFF
(continued)
A-15