Assembly - FITFIU FITNESS BM-30 Manual Usuario

1. Main frame assembly (x1)
2. Forefoot tube assembly (x1)
3. Carriage bolt M8*60, lock nut d8 (x2)
4. Plug d10*60 (x3)
5. Pull cord (x1 pair)
6. Open-end wrench 13-17 (x1)
• You should first remove the product and accessories from the box and make sure that all items are inside.
•
You should save the packing material until you have carefully inspected the product and used it satisfactorily.
• Remember to keep the original product packaging until the warranty has expired.
ATTENTION: If any parts are missing or damaged you must contact FITFIU Fitness Technical
Support. Do not use this product without replacing the part, as using this product with damaged
or missing parts may cause serious injury to the operator.

ASSEMBLY

STEP 1:
Remove the main frame assembly (1) from the package, open the main frame assembly in the direction
indicated by the arrow, and place the main frame assembly on the ground side in the direction indicated by the arrow.
the direction indicated by the arrow, and place the main frame assembly on the ground side in the direction of the
above the direction of the figure above. Align the corresponding dowel holes. Then insert the three
d10*60(4) dowels into the dowel holes respectively (as shown in the figure above).
4
1
29
WEIGHT BENCH BM-30
EN