Operations - Clarion DXZSSSMP Manual De Instrucciones

Note:Be sure to read this chapter referring to the front diagrams of
chapter
li3.
CONTROLS" on page
5
(unfold).
- EXCITE
- CUSTOM
-Z+ OFF
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Turning on/off the power
Note:
• Be careful about using this unit for
a
long time
without running the engine. If you drain the car's
battery too far, you may not be able to start the
engine and this can reduce the service life of the
battery.
1. Press the [SRC] button.
2. The illumination and display on the unit light
up. The unit automatically remembers its last
operation mode and will automatically switch
to display that mode.
3. Press and hold the [SRC] button for 1
second or longer to turn off the power for the
unit.
Notes:
• System check
The first time this unit is turned on after the wire
connections are completed, it must be checked
what equipment is connected. When the power is
turned on, the "SYSTEM CHK" appears in the
display, then the unit returns to the clock display
mode. The system check starts within the unit.
When the system check is complete, press the
[SRCj button again.
• If no operation is performed for more than 7
seconds, the audio mode is cancelled and returns
to the previous mode.
Selecting
a
mode
1. Press the [SRC] button to change the
operation mode.
2. Each time you press the [SRC] button, the
operation mode changes in the following
order:
Radio mode" SIRIUS mode"
CD/MP31
WMA mode .. CD changer mode .. DVD
changer mode" TV mode .. AUX mode ..
Radio mode...
*
External equipment not connected with
CeNET is not displayed.
12
DXZ555MP
Adjusting the volume
1. Press the front part of the [ROTARY] knob.
The knob will pop up.
2. Turning the [ROTARY] knob clockwise
increases the volume; turning it
counterclockwise decreases the volume.
*
The volume level is from 0 (minimum) to 33
(maximum).
Switching the display
Press the [0] button to select the desired
display.
Each time you press the [0] button, the display
switches in the following order:
Main display" Title display" Clock display ..
Main display ...
*
Once selected, the preferred display becomes
the display default. When a function
adjustment such as volume is made, the
screen will momentarily switch to that
function's display, then revert back to the
preferred display several seconds after the
adjustment.
*
When you have entered a title in a CD/MP31
WMA, it appears in the title display. If you
have not entered a title, "NO TITLE" appears
in the title display instead. For information on
how to enter a title, refer to the subsection
"Entering titles" in section "Operations
Common to Each Mode".
Setting the Z-Enhancer Plus
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
*
The factory default setting is "Z+ OFF".
Each time you press the [Z+] button, the tone
effect changes in the following order:
"Z+ OFF" .. "BASS BOOST" .. "IMPACT" ..
"EXCITE" .. "CUSTOM" .. "Z+ OFF" ...
- BASS BOOST bass emphasized
-IMPACT bass and treble
emphasized
bass and treble
emphasized mid de-
emphasized
user custom
no sound effect