Radio Operations - Clarion DXZSSSMP Manual De Instrucciones

Basic Operations
Adjusting the fader
1.
Press the [A-M] button and select "FAD 0".
2.
Turning the [ROTARY] knob clockwise
emphasizes the sound from the front
speakers; turning it counterclockwise
emphasizes the sound from the rear
speakers.
*
The factory default setting is "FAD 0".
(Adjustment range: F12 to R12)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust
the low sound area like the normal sound
adjustment function, but emphasizes the deep
bass sound area to provide you with a dynamic
sound.
* The factory default setting is off.
1. Press the
[M-B]
button to turn on the
MAGNA BASS EXTEND effect.
"M-B EX"
lights in the display.
2. Press the
[M-B]
button to turn off the
MAGNA BASS EXTEND effect.
"M-B EX"
goes off from the display.
14
DXZ555MP
Radio Operations
Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency appears in the display.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the
following order:
FM 1
~
FM2
~
FM3
~
AM
~
FM 1...
3. Press the
[<~, ~>]
lever upward or
downward to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the
desired band (FM or AM).
*
If "MANU" is lit in the display, press and hold
the [BND] button for 1 second or longer.
"MANU" in the display goes off and seek
tuning is now available.
2. Press the
[<~, ~>]
lever upward or
downward to start automatic station tuning.
When the lever is pressed upward, search
will be performing in the direction of higher
frequencies. When the lever is pressed
downward, search will be performed in the
direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [BND] button and select the
desired band (FM or AM).
*
If "MANU" is not lit in the display, press and
hold the [BND] button for 1 second or longer.
"MANU" is lit in the display and manual tuning
is now available.
2. Tune into a station .
• Quick tuning:
Press the
[<~, ~>]
lever upward or
downward and hold in position for 1 second
or longer to begin station tuning .
• Step tuning:
Press the
[<~, ~>]
lever upward or
downward to perform manual tuning.