Basic Operations; Adjusting The Tone; Adjusting The Balance - Clarion DXZSSSMP Manual De Instrucciones

Tabla de contenido

Publicidad

Basic Operations
Adjusting the Z-Enhancer Plus
1.
Press the [Z+] button and select the
Z-
Enhancer Plus mode to adjust.
2.
Press the [A-M] button and turning the
[ROTARY] knob clockwise adjusts in the +
direction; turning it counterclockwise adjusts
in the - direction.
• When "B-BOOST 0" selected, you can
adjust the bass in the range of
-3
to
3.
.When "IMPACT 0" selected, you can
adjust the bass and treble in the range of
-3
to
3.
.When "EXCITE 0" selected, you can adjust
the bass and treble in the range of -3 to 3.
*
When Z. . . Enhancer Plus is selected, press and
hold the [Z+] button for 1 second or longer to
change to the "CUSTOM" mode.
Bass/treble characteristics become flat and the
indication "Z+
FLAT'
is shown in the display.
Adjusting the tone
Press the [A-M] button and select the item to
adjust. Each time you press the [A-M] button,
the item changes as following order:
.When "BASS BOOST" is set
"B-BOOST
0" -.
"BAL
0" -.
"FAD
0" -.
Last function mode.
.When "IMPACT" is set
"IMPACT
0" -.
"BAL
0" -.
"FAD
0" -.
Last
function mode.
• When "EXCITE" is set
"EXCITE
0" -.
"BAL
0" -.
"FAD
0" -.
Last
function mode.
• When "CUSTOM" is set
"BASS <G 0>" -. "TREB <G 0>" -. "BAL 0"
-. "FAD
0" -.
Last function mode.
• When "Z+ OFF" is set
"BAL
0" -.
"FAD
0" -.
Last function mode.
Adjusting the bass (Gain,
Frequency, Q-curve)
This adjustment can be performed when the
Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "BASS
<GO>".
2. Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it
counterclockwise attenuates the bass.
*
The factory default setting is "BASS <G 0>".
(Adjustment range: -6 to +8)
3. Press the
[<<lllIIII,
~>]
lever upward or
downward to select "BASS <F 50>".
Turn the [ROTARY] knob to select the
frequency.
*
The factory default setting is "BASS <F 50>".
(Adjustment
50/80/120
Hz)
4.
Press the
[<<lllIIII,
~>]
lever upward or
downward to select "BASS <Q 1>".
Turn the [ROTARY] knob to select the Q-
curve.
*
The factory default setting is "BASS <Q 1>".
(Adjustment
1/1 .25/1 .5/2)
5. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the treble (Gain,
Frequency)
This adjustment can be performed when the Z-
Enhancer Plus is set to "CUSTOM".
1. Press the [A-M] button and select "TREB
<GO>".
2. Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it
counterclockwise attenuates the treble.
*
The factory default setting is "TREB <G
0>".
(Adjustment range: -6 to +6)
3. Press the
[<<lllIIII,
~>]
lever upward or
downward to select "TREB <F 12K>".
Turning the [ROTARY] knob to select the
frequency.
*
The factory default setting is "TREB <F
12K>".
(Adjustment 8 kHz/12 kHz)
4. When the adjustment·is complete, press the
[A-M] button several times until the function
mode is reached.
Adjusting the balance
1. Press the [A-M] button and select "BAL 0".
2. Turning the [ROTARY] knob clockwise
emphasizes the sound from the right
speaker; turning it counterclockwise
emphasizes the sound from the left speaker.
*
The factory default setting is
"SAL
0".
(Adjustment range: L 13 to R13)
3. When the adjustment is complete, press the
[A-M] button several times until the function
mode is reached.
DXZ555MP
13

Publicidad

Tabla de contenido
loading

Tabla de contenido