WEG CLIC-02 Manual Del Usuario página 20

Quick Programming Guide
3.3 CONNECTING THE PROGRAMMING CABLE
Remove the plastic cover of the CLIC-02 connector using a screwdriver as shown in the
figure below. Insert the end of the plastic connector of the programming cable into CLIC-02
as shown in the figure below. Connect the opposite end of the cable to a serial port RS232
on the computer.
3.4 ESTABLISHING COMMUNICATION
1. Open the CLIC-02 programming software and select "New Program in Ladder" as
shown below.
20 | CLIC-02 - English -