WEG CLIC-02 Manual Del Usuario página 32

Installation
To Uninstall
Press the top button of the expansion and slide the expansion module in the opposite
direction of the basic unit to release the IOs bus connector. Release the lock and pull
CLIC-02 off the track. Remove the basic unit by releasing the bottom lock and pulling
CLIC-02 off the track.
It is recommended to use the clamp to hold the CLIC-02 in position.
„
Fixing clamp
DIN rail
4.3.2 Direct Installation
Use screw M4 x 15 mm to install CLIC-02 directly, as shown below.
M4 x 20 (#8 x 32)
32 | CLIC-02 - English -