Touchscreen Display Operation - Metra 99-5838CH Instrucciones De Instalación

HVAC Control screen
• This is the HVAC control screen which will be displayed on the touchscreen display.
This is considered the main screen.
• Disregard the upper left tab with (3) arrows, it will not be used in this application.
• The upper right tab with the gear icon will take you to the Configuration Settings screen.
• The climate controls will function in the same manner that they did with the factory
climate controls, yet via touchscreen buttons instead. The temperature control will display a
numerical scale, with "LO" being the coldest, and "HI" being the hottest: LO / 1-9 / HI
Note: The "Info" button will only be shown if SYNC is to be retained.
14

TOUCHSCREEN DISPLAY OPERATION

Touchscreen calibration:
• Press and hold the upper two soft buttons on either side of the touchscreen for
10 seconds.
• A screen will pop up asking for you to press the target in the screen.
• After pressing the target with your finger, the calibration process will be
complete, and the screen will disappear.
Continued on the next page
|
1.800.221.0932 MetraOnline.com