INTERFACE FEATURES
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse, speed sense)
• Retains audio controls on the steering wheel
• Retains SYNC
• Retains the factory backup camera
• Retains balance and fade
• Micro "B" USB updatable
INTERFACE COMPONENTS
• Axxess interface (built into the touchscreen display)
• 5838 harness
• HVAC interface
• HVAC interface harness
• 16-pin harness with stripped leads
• 12-pin backup camera harness
• 4-pin harness with yellow RCA jacks
• Female 3.5mm connector with stripped leads
AXXESS INTERFACE INSTALLATION
TABLE OF CONTENTS
Connections to be made ........................................................................................................10-12
Installing the interface . ..........................................................................................................12-13
Initializing the interface . .............................................................................................................13
Final assembly .............................................................................................................................13
Extra features (SYNC)...................................................................................................................13
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
REV. 9/28/2017 INST99-5838CH
9