WARNING
!
Fan installation must be completed, including the
installation of the fan blades, before testing the fan
control.
8.1
Check the operation of the Ceiling Fan by sliding the
Ceiling Fan Speed Knob through the Four positions
(Figure 25) .
Slide the Ceiling Fan Speed Knob to the desired
airflow:
H = High Speed
M2 = Medium High Speed
M1 = Medium Low Speed
L = Low Speed
To Turn the Fan OFF, Slide the Ceiling Fan Speed
Knob down to the OFF position (Figure 25) .
8.2
Restore Electrical Power to the Outlet Box by turning
the Electricity on at the Main Fuse Box or Circuit
Breaker Panel .
During Summer Months, run the Fan Counter-
Clockwise, as you look up at it, to direct airflow
downward .
During the Winter Months, run the Fan Clockwise,
as you look up at it, to direct airflow upward .
If airflow is desired in the opposite direction, turn the
Ceiling Fan OFF and wait for the Blades to stop turning .
Slide the Reverse Switch to the opposite position, and
turn the Ceiling Fan ON again (Figure 26) .
The Fan Blades will turn in the opposite direction and
reverse the airflow .
IMPORTANT CARE INSTRUCTIONS
for your Ceiling Fan
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed .
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish .
Abrasive cleaning agents are not required and should
be avoided to prevent damage to finish .
8. Operating Your Ceiling Fan
9. Maintenance
FAN SPEEDS
OFF
POSITION
CEILING FAN
SPEED KNOB
Figure 25
REVERSING
SWITCH
Figure 26
Reverse Switch Information
Season
Blade Rotation Direction
Summer
Counter-Clockwise
Winter
Clockwise
!
Do not use water when cleaning your ceiling fan.
It could damage the motor or the blades and create the
possibility of an electrical shock.
17
L
M1
M2
H
OFF
WARNING
luminancebrands.com
Please contact 1-800-777-4440 for further assistance
U.L. Model No.: CF500