Positioning The Childseat; Booster Mode - Britax PIONEER Guia Del Usuario

Positioning the Child Seat: Booster Mode
Lower Anchors
Before you begin:
IMPORTANT: It is not necessary to use lower anchors or tether
to position this child restraint in booster mode. To use this seat
in booster mode without lower anchors, see instructions for
Securing Your Child on page 20.
IMPORTANT: Use lower anchors only to position this child seat
in your vehicle seat. Secure your child using the vehicle's lap-
shoulder belt system.
• Check that your vehicle has lower anchors.
• Check that your vehicle has a top tether anchor.
• Loosen the tether and place it over the child seat back to
keep it from becoming pinned between the child seat and
vehicle seat during positioning.
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat.
Pull seat cover and seat
1
pan forward to access
lower connectors.
Route the lower connector
2
strap along the green belt path
behind the seat pan and firmly
press the lower connectors
onto their adjacent lower
anchors.
* Verify that the strap is not
twisted.
Pull the end of the lower
3
connector strap to remove
slack.
16