Entering The Setup Mode And Its Basics - Ikegami ISD-A30 Manual De Instrucciones

8-3. Entering the setup mode and its basics

8-3-1. SETUP MENU (Main menu)
Ｓ Ｅ Ｔ Ｕ Ｐ Ｍ Ｅ Ｎ Ｕ
→ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
ＧＡＩＮ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＳＥＴＵＰ ＥＸＩＴ
(1) CAMERA ID
(2) LIGHT CONTROL The backlight compensation and sensing area spotting
(3) GAIN
(4) WHITE BALANCE The white balance mode can be selected. The manual
(5)SYNC
(6)MENU LOCK
(7)SETUP
* New settings can be saved, if EXIT is selected to quit the menu.
Up to 24 characters can be displayed on screen.
modes can be selected.
The gain control modes can be selected.
white balance settings are also made.
The sync systems (INT and LL) can be selected and
set up.
The saved settings can be locked.
The EXIT, CANCEL or RESET action is selected and
executed.
① EXIT:
Used to save the settings and to quit
the menu.
② CANCEL: Used to return the settings to the
previously saved ones.
③ RESET:
Used to return the settings to the
factory ones.
E-11
Hold down the E button longer than
2 seconds, and the menu screen
at left appears on screen. A high-
lighted item is now selected.