Ikegami ISD-A30 Manual De Instrucciones página 30

(19) Local Setup:
(20) Lens:
(21) Power Requirement:
(22) Power Consumption
and Current:
(23) Operating Temperature
and Relative humidity:
(24) Protection Standard:
(25) Dome cover:
(26) Size:(Diameter & Height) ø140mm x 110mm (excluding protrusions)
(27) Weight:
(28) Input/output connectors: • VIDEO OUT: BNC
(29)Supplied accessories:
* Specifications and design are subject to change for product improvements
without notice.
Selectable and adjustable with on-screen
display using a supplied setup adaptor for;
Camera ID, AGC ON/OFF, ATW/AWC/
MANU selection and adjustment, Sync LL/
INT switching, and phase adjustment, Wide
Dynamic Range level, Iris Level, Back light
compensation On or Off and BLC Spot area
setting, Electronic Sensitivity Up ON/OFF,
DNR ON/OFF, Monitor output selection in
CRT/LCD, Detail level, Chroma level,
control, P.Mask setting
Built-in. C mount Vari-focal Lens:
Type 26 : 2.6mm ~ 6mm
Type 49 : 4 ~ 9mm
Type 92 : 9 ~ 22mm
Adjustable with:
90 degree rotation (360 degree base)
±50 degree elevation
±50 degree azimuth
① AC 24 V ±10%, 60Hz
② DC 12 V (+10.5V ~ + 28V)
① 2.8 watts (or 210mA) at AC 24 V
② 2.4 watts (or 200mA) at DC12V
-10 to +50°C,
RH 30% to 90% (No Condensation)
IP4X environmental protection level
Inner and Outer, Double dome type
Approx. 5"1/2ø x 4"1/3
570g (Approx.1.26 lbs.)
• DC12V or AC24V input: open-ended wires
• Monitor Output : RCA type coaxial connector
• Setup Adaptor input: 6P
Instruction Manual, 1 vol.
Setup Adaptor with cable, 1 set
E-27
(Hirose DF11CZ-6DP type)