8-4. Setup Procedures
8-4-1. Camera ID
(1) CAMERA ID ON/OFF setting
Highlight CAMERA ID. Using
the E, L or R button, access the
ON/OFF setting. Decide the ON
or OFF setting with the L or R
button.
(2) ID characters setting
Keep CAMERA ID highlighted
and press the E button. The
screen at right shows up.
① ID
Press the E button on ID,
and the cursor appears. With
the L or R button, select a
character. Press the E button to save it, and the character box advances
to the next one. To delete a character, press the E button to go through
the code and place the cursor in the character to delete. Press the L or
R button to get the box blank.
② ID ALL CLEAR
Highlight this item and press the E button. The ID code is cleared.
③ ID POSITION
Highlight this item and press the L or R button. In this way, the ID code
can be positioned up or down.
④ RET
Press the E button to go back to the main menu screen.
S E T U P M E N U
→CAMERA ID OFF
LIGHT CONTROL
GAIN
WHITE BALANCE ATW
SYNC INT
MENU LOCK OFF
SETUP EXIT
ID EDIT
→ID.....................
ID ALL CLEAR
ID POSITION UP
RET
E-13