STOK Island SGP2220SB Manual Del Operador página 14

STEP 12: INSTALL INSERT STORAGE RACK
See Figure 16.
Remove the following hardware from the blister pack:
AA - 4 Screws (M5 x 12 mm)
 Line up insert storage rack with holes in storage shelf.
 Insert the screws (AA) through the holes in the bracket
and shelf.
 Tighten securely.
INSERT STORAGE
RACK
SCREW
(AA)
Fig. 16
ASSEMBLY
STORAGE
SHELF
STEP 13: INSTALL TANK RETENTION BRACKET
See Figure 17.
Remove the following hardware from the blister pack:
AA - 2 Screws (M5 x 12 mm)
 Line up tank retention bracket with holes left leg
assemblies.
 Insert the screws (AA) through the holes in the retention-
bracket and left leg assemblies.
 Tighten securely.
TANK
RETENTION
BRACKET
SCREW
(AA)
Fig. 17
14