Greenlee CMA-40 Manual De Instrucciones página 5

Identification
1. Jaw Unit
2. Leads
3. Lever
3
1
Operation
Electric shock hazard:
Contact with live circuits can result in severe injury or death.
Note: The CMA-40 requires a multimeter (purchased separately) capable of reading AC millivolts.
1. See the instruction manual supplied with the multimeter.
2. Connect the CMA-40 to the voltage input terminals of your multimeter. Set the meter to
read AC voltage.
3. See Typical Measurements for illustrations of typical uses.
4. Test the unit on a known functioning circuit or component. If the unit does not function as
expected, send the unit to Greenlee for repair.
5. Take the reading from the circuit to be tested. If the resolution is not satisfactory, remove
the meter from the circuit and change to the next lower range.
CMA-40
2
5