Kichler 35153A Manual Del Usuario página 10

ASSEMBLY INSTRUCTIONS
10. Loosen the two shoulder screws without fully
removing the hanging bracket (A). Assemble canopy
(C) by rotating keyhole slot in canopy over shoulder
screws in hanging bracket (A). Tighten shoulder
screws. Securely attach and tighten the canopy hole
cover (I) over the shoulder screws in the hanging
bracket (A) utilizing the keyhole slot twist-lock
feature.
11. Attach blade (K) to the arm on the motor assembly
(F) with blade screws. Do not tighten blade screws
until each screw has been started. Then, tighten
each screw starting with the center screw.
Repeat for remaining blades
12. Pass blade iron (D) over blade (K) and secure to
arms with blade iron screws.
Repeat for remaining blade irons.
10
C
11
Arm
K
12
K
10
A
Shoulder
Screw
I
F
Arm
D