EMAK Oleo-Mac CHEYENNE 92 Manual De Uso página 76

4.2 Description and functions of the control elements
The shown locations of control elements may differ from their actual locations depending
on the selected configuration of the machine.
(1) Main power switch
Serves to start up / shut off the engine. It has the following 4 positions:
* The LED lights on the front and rear of the machine will automatically turn on when the machine is
started.
(2) Forward drive pedal
The pedal controls the power going to the wheels and regulates the speed of the machine forward.
ATTENTION: Changing the travel direction forwards / reverse is only possible
after stopping the machine!
(3) Reverse drive pedal
The pedal controls the power going to the wheels and regulates the speed of the machine backwards.
ATTENTION: Changing the travel direction forwards / reverse is only possible
after stopping the machine!
Ignition off / turn off the ignition
STOP
Turn on / turn off the headlights on the hood*
Ignition on, the engine is running.
Start engine – starting position
The more the pedal is pushed towards the floor, the faster the machine will
be and vice versa.
When the pedal is released it will automatically return to the neutral position
and the machine will stop.
The more the pedal is pushed towards the floor, the faster the machine will
be and vice versa.
When the pedal is released it will automatically return to the neutral position
and the machine will stop.
76