Harbor Breeze LP8293LAZ Manual De Usuario página 10

INITIAL ASSEMBLY INSTRUCTIONS
10. Thread the downrod (C) into the downrod support of
the motor (A). Align the holes in the downrod support
with the holes in the downrod (C) and re-install the
downrod pin (JJ). Secure the downrod pin (JJ) with
the downrod clip (II). Re-install the two previosuly
removed downrod support set screws (EE) and
tighten securely in the downrod support.
WARNING: It is critical the downrod pin (JJ) is
properly installed and the downrod support set screws
(EE) are securely tightened. Failure to do so could result
in the fan falling.
Hardware Used
Downrod Support
EE
Set Screw
II Downrod Clip
JJ Downrod Pin
11. Route the wires through the motor coupling cover (F),
canopy screw cover (E) and ceiling canopy (D).
10
C
EE
x 2
x 1
x 1
11
D
10
JJ
II
JJ
A
Lowes.com/harborbreeze
II
E
F