Aerofeed Accesories - Solter aeroprocess 4110 DV Manual De Instrucciones

AEROFEED ACCESORIES

REFRIGERATION KIT (56205)
To mount the Aerofeed cooling kit, insert the 2 water pipes from the Aerofeed connection through the hole in the base
(see figure below). Connect them to the quick-fit plugs in the kit respecting the colors. Position the kit and screw it to
the base of the winder.
WHEELS KIT (56206)
To mount the wheels kit, first remove the 4 nylon feet from the bottom of the unit. Attach the wheels to the 2 brackets
and screw these to the base of the winder. Do not reuse the nylon feet to screw the brackets; use the metal screws
provided with the kit.
ROLLERS
Rollers
0,6 - 0,8 V Groove
0,8 - 1,0 V Groove
1,0 - 1,2 V Groove
1,2 - 1,6 V Groove
0,8 - 1,0 U Groove
1,0 - 1,2 U Groove
1,2 - 1,6 U Groove
0,8 - 1,0 Knurled Groove
1,0 - 1,2 Knurled Groove
1,2 - 1,6 Knurled Groove
MATERIAL
Fe, SS,Cu Si, Cu Al
Fe, SS,Cu Si, Cu Al
Fe, SS,Cu Si, Cu Al
Fe, SS,Cu Si, Cu Al
Al
Al
Al
Flux Core, Metal Core
Flux Core, Metal Core
Flux Core, Metal Core
REF.
55606
-
55607
55608
55609
55610
-
55611
55613
39