Solter aeroprocess 4110 DV Manual De Instrucciones página 43

power unit
Er 5 Control PCB is not compatible
Er 6 Error in internal memory
Er 10 Overheating
The handling of internal parts of the machine should be performed only by qualified personnel. There is a risk of
electric shock on contact with live parts. You should NOT operate without the covers properly placed. Before
accessing the interior of the machine, unplug it from the mains and wait at least 5 minutes before carrying out any
maintenance.
persists, note the value of the second display and query the
technical service.
A non-compatible control PCB has been installed or has stopped
working. Replace it.
Non-operational data memory, replace the operator panel.
Wait until the equipment regains a safe temperature.
Verify the input voltage.
ATTENTION
42