Troubleshooting - Problems With The Computer Display; Maintenance, Cleaning And Care - Sportplus X-BIKE Manual De Instrucciones

8. TROUBLESHOOTING - PROBLEMS WITH THE COMPUTER DISPLAY

"No function values are displayed. Only the pulse display is working."
This could mean there is transmission interference between the home trainer and the
computer. Check to see that all cables are properly connected to one another and that
none of the cables is damaged.
"The pulse display does not work anymore / always displays P."
If all other computer function values are being displayed, then the problem is either the hand
sensor or the cable connection between the sensor and the computer. Check to see that
all cables are properly connected to one another and that none of the cables is damaged.
TROUBLESHOOTING
Problem
The pulse display
doesn't work properly.
No computer display
or incorrect computer
display.
Squeaking.
Please contact our customer service in case of further questions or problems.

9. MAINTENANCE, CLEANING AND CARE

• After the assembly and before using the home trainer, always make sure that all bolts/
nuts are fully and correctly tightened.
• Clean the unit regularly with a slightly damp cloth and a mild cleaning agent.
• This is especially important for the seat and the handles, as these parts are in constant
contact with parts of your body during the entirety of training.
Cause
Faulty wiring.
Bad contact with hands.
There may be a
transmission interference
between product and
computer.
Connections (bearing
bushings) are dry.
40
Solution
Make sure, that all cables are
properly connected and none
of the cables is damaged.
Moisten your hands.
Make sure, that all cables are
properly connected and none
of the cables is damaged.
Lubricate the bearing
bushings with grease.