Assembly Instructions - Harbor Breeze 00598 Manual De Instrucciones

ASSEMBLY INSTRUCTIONS

12. Insert blade assembly through slot on fan motor
assembly (H) and align two screw holes in blade
arm (F) with screw holes in fan motor assembly (H).
Secure with two blade arm screws (BB). Repeat for
remaining blade assemblies.
Hardware Used
BB Blade Arm Screw x 10 + 1 extra
13. Loosen two preassembled screws from fan motor
assembly (H). Remove and save remaining
preassembled screw.
14. Pull the BLUE and WHITE wires from fan motor
assembly (H) through center hole of fitter plate (I).
Align two keyslots on fitter plate (I) with two screws
on black bracket below fan motor assembly (H).
12
Slot
F
BB
13
H
Screw
Screws
(remove)
(loosen only)
14
Black
bracket
I
Keyslots
10
ASSEMBLY INSTRUCTIONS
15. Place the fitter plate (I) over two screws and turn
clockwise until it locks. Install previously removed
screw (Step 13, page 10) and securely tighten all
screws.
H
16. Loosen two preassembled screws from fitter plate (I).
Remove and save remaining preassembled screw.
17. Connect BLUE wire from fan motor assembly (H) to
BLACK wire from light fixture (J). Connect WHITE
wire from fan motor assembly (H) to WHITE wire from
H
light fixture (J).
15
I
16
H
Screw
(remove)
I
Screws
(loosen only)
17 EE
Blue
White
I
Black
H
EE
11
Screw
B
H
B
J