Mitsubishi Heavy Industries SC-SL2NA-E Manual Del Propietário página 6

REMOTE CONTROL OPERATION ENABLE / DISABLE display
Displays items for which remote control operation is disabled.
Displayed when there is a managed unit requiring a check.
Displayed when there is a unit being managed in which an error has occurred.
This button sets an indoor unit for which operation by external timer is enabled.
– 5 –
HOLIDAY SET display
Displayed when a program for holidays is set.
INVALID INPUT display
Displayed when a button input is invalid.
Displays the fan speed.
MAINTENANCE display
PROGRAM CONFIRM display
Displayed when a set program is displayed.
CLEAN FILTER display
Displayed when there is a unit being managed
whose fi lter needs to be cleaned.
ROOM TEMPERATURE display
Displays the room temperature.
OUTDOOR UNIT No. display
Displays the outdoor unit number in the ROOM
TEMPERATURE display section.
MANAG. UNIT NUM display
Displays the number of units managed in the
SET TEMPERATURE display section.
SET TEMPERATURE display
Displays the set temperature.
Displays the louver direction.
TIMER INPUT display
Displayed when an external timer is being input.
This button runs indoor units.
This button stops indoor units.
This button is for service.
During normal operation, do not press this button.
FILTER RESET button
This button resets the CLEAN FILTER display.
Press this button after cleaning the air fi lter.
TEMP (
This button sets the temperature.
This button adjusts the louver direction.
TIMER INPUT SET button
FAN SPEED display
CHECK display
LOUVER display
RUN button
STOP button
CHECK button
or ) button
LOUVER button