Accessory Parts; Selection Of Installation Place - Toshiba RAV-GM901UTP-E Manual Del Usuario

2

Accessory parts

Pipe Q'ty Shape
Installation Manual 1 This manual
Owner's Manual 1
CD-ROM 1 —
Heat insulating pipe 2
Installation pattern 1 —
Installation gauge 2
Heat insulator 1
Washer 4
Eccentric washer 4
Hose band 1
Flexible hose 1
Heat insulator 1
 Separate sold parts
The Ceiling panel and remote controller are sold separately. For the installation of these products, follow the Installation
Manuals supplied with them.
103-EN
Usage
(Hand over to customers)
(For other languages that do not appear in this Installation Manual,
please refer to the enclosed CD-R.)
(Hand over to customers)
(For other languages that do not appear in this Installation
Manual, please refer to the enclosed CD-R.)
Owner's Manual and Installation Manual
For heat insulation of the pipe connecting section
For checking of ceiling opening and the main unit position
For positioning of the ceiling position
(To be used with the installation pattern)
For heat insulation of drain connecting section
For hanging unit
For hanging-down unit
For connecting drain pipe
For drainage of drain water
For sealing of wire connecting port
3

Selection of installation place

WARNING
• Install the air conditioner at enough strong place to withstand the weight of the unit.
If the strength is not enough, the unit may fall down resulting in injury.
• Install the air conditioner at a height 2.5 m or more from the floor.
If you insert your hands or others directly into the unit while the air conditioner operates, it is dangerous because you
may contact with revolving fan or active electricity.
CAUTION
• Do not install the air conditioner in a location subject to a risk of exposure to a combustible gas.
If a combustible gas leaks and stays around the unit, a fire may occur.
Upon approval of the customer, install the air conditioner in a place that satisfies the
following conditions
Place where the unit can be installed horizontally.
•
Place where a sufficient servicing space can be ensured for safety maintenance and check.
•
Place where drained water will not cause any problem.
•
Avoid installing in the following places
Place exposed to air with high salt content (seaside area), or place exposed to large quantities of sulfide gas
•
(hot spring).
(Should the unit be used in these places, special protective measures are needed.)
A restaurant kitchen where a lot of oil is used or place near machines in a factory (Oil adhering to the heat
•
exchanger and resin part (turbo fan) in the indoor unit may reduce the performance, generate mist or dew drop, or
deform or damage resin parts.)
Places where iron or other metal dust is present. If iron or other metal dust adheres to or collects on the interior of
•
the air conditioner, it may spontaneously combust and start a fire.
Place where organic solvent is used nearby.
•
Place close to a machine generating high frequency.
•
Place where the discharged air blows directly into the window of the neighbor house. (Outdoor unit)
•
Place where noise of the outdoor unit is easily transmitted.
•
(When install the outdoor unit on the boundary with the neighbor, pay due attention to the level of noise.)
Place with poor ventilation. (Before air ducting work, check whether value of air volume, static pressure and duct
•
resistance are correct.)
Do not use the air conditioner for special purposes such as preserving food, precision instruments, or art objects,
•
or where breeding animals or growing plants are kept. (This may degrade the quality of preserved materials.)
Place where any of high-frequency appliances (including inverter devices, private power generators, medical
•
equipment, and communication equipment) and inverter-type fluorescent light is installed.
(A malfunction of the air conditioner, abnormal control, or problems due to noise to such appliances / equipment
may occur.)
When the wireless remote controller is used in a room equipped with an inverter-type fluorescent light or at a
•
place exposed to direct sunlight, signals from the remote controller may not be received correctly.
Place where organic solvent is used.
•
Place near a door or window exposed to humid outside air (Dew dropping may form.).
•
Place where special spray is used frequently.
•
– 52 –
EN
104-EN