Operation; Pressure Connections - Druck DPI 800 Manual De Instrucciones

Example 2) Set up values for x:y Scaling = 0 to 100%
Settings
mA
+04.000
+20.000
Sk1
Sk1 = Edit

2. Operation

This section gives examples of how to connect and use the instrument. Before you start:
• Read and understand section "Safety" on page 1.
• Do not use a damaged instrument.

2.1 Pressure Connections

CAUTION
instrument. If available, use the flat faces on the pressure connector to hold the
instrument in position.
Use an applicable method to seal the pressure connections, and then tighten to the applicable
torque (Figure 1).
Copyright 2003 Baker Hughes Company.
10 | DPI 800/802 Instruction Manual–English
Settings
1
x:y
%
=
+04.000
= +04.000

=
+20.000

= +20.000
= Flow scaling (mA, pressure only)
To prevent damage, do not apply torque to the body of the
2 Edit
x:y
= +00.000
 
= +100.00
3 4

MENU
OK

