Adjusting The Seat - Cybex Platinum ATON Q Manual Del Propietário

ADJUSTING THE SEAT

The Aton Perfect Positioner™ consists of a headrest, no
rethread harness and padded insert. The Perfect Positioner
may be adjusted up and down through eight positions to
perfectly fit your baby.
The Aton Q is shipped in the lowest position with the Padded
Insert already folded.
1. Unbuckle the Harness and Chest Clip
2. Place the child in the Infant Carrier, making sure
the buttocks are sitting in the very bottom of the
seat, with their crotch at the crotch strap.
3. Adjust for your baby by pulling up on the gray plastic Positioner
Ring while sliding the Perfect Positioner up until the Harness
Slots are even with or slightly below your child's shoulders.
Periodically check for proper strap height as your child grows.
For proper use of the Infant Carrier, the Harness
shoulder straps MUST be AT or BELOW your child's
shoulders.
If your child's shoulders fall below the Harness Slots, even in the
lowest position, fold the lower portion of the Padded Insert under at
the seam in order to boost your child up for proper Harness fit.
Unfold the Insert when no longer needed to reach the Harness Slots.
15
All manuals and user guides at all-guides.com
USING THE INFANT CARRIER
a
If needed, fold the Padded Insert
under at the seam to boost your
child up for proper Harness fit.