Vehicle Seat Location Requirements - Cybex Platinum ATON Q Manual Del Propietário

Ocultar thumbs Ver también para ATON Q:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WARNING! DEATH or SERIOUS INJURY can occur
!
NEVER place this child restraint on a front seat with an active
airbag. DEATH or SERIOUS INJURY may occur. The REAR
seat is the safest place for children 12 and under.
Based on crash statistics, the National Highway Traffic Safety
Administration (NHTSA) recommends that parents select the
REAR SEAT as the safest location for a properly installed child
restraint rather than a front seating position.
ONLY PLACE this child restraint REAR FACING in a vehicle
seating location allowed by the vehicle manufacturer. Refer to your vehicle Owner's
Manual
for information about vehicle seat belt systems, air bags, and child
restraint installation to determine allowable seating positions.
If possible, INSTALL the Aton Q Base in a seating position that will allow the Load
Leg Foot to be extended into a LOCKED position with firm contact with the vehicle
floor.
NEVER INSTALL the Aton Q Base in a seating position where the Load Leg, even
in its shortest position, causes the Base to be pushed up above the vehicle seat. If
necessary, the Base may be installed with the Load Leg folded up underneath.
The REAR SEAT is the safest location for a properly installed child restraint.
Use this child restraint in FORWARD FACING VEHICLE SEATS ONLY.
The Aton Q is allowed to touch the vehicle seat(s) in front of it, as long the recline angle of the
Aton Q is not affected.
The best position for the child restraint is one that is recommended by your vehicle Owner's
AND allows a proper and secure installation of the restraint every time. If possible,
Manual,
have
an adult ride in the rear with the child in order to monitor the child.
All manuals and user guides at all-guides.com

VEHICLE SEAT LOCATION REQUIREMENTS

?
?
18

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido