Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 148
ENGLISH
Use the • and ª cursor buttons to select the
MP3 file you want to play, then press the PLAY
button or ENTER button.
• Playback starts.
The display can be switched between the
single elapsed time and the single remaining
time and the track name by pressing the
DISPLAY button.
Programmed playback is not possible with
MP3 discs.
To change the MP3 file
Press the STOP button, then use the • and ª
cursor buttons to reselect the desired MP3
3
file.
To set the random play mode
In the stop mode, press the RANDOM button.
Then press the PLAY button or ENTER button.
To set the repeat mode
The repeat mode changes each time the
REPEAT button is pressed.
FOLDER
TRACK REPEAT
FOLDER REPEAT
To return to the initial disc information
screen
Press the STOP button, use the cursor button
to select "ROOT", then press the ENTER
button. The screen in step 1 reappears.
NOTES:
• The DVD-2910 is compatible with the "MPEG-1 Audio Layer 3" standards (sampling frequency of 44.1 kHz
or 48 kHz). It is not compatible with such other standards as "MPEG-2 Audio Layer 3", "MPEG-2.5 Audio
Layer 3", MP1, MP2, etc.
• It may not be possible to play some CD-R/RW discs due to disc properties, dirt, warping, etc.
• The digital signals output when playing MP3 files are MP3 signals converted into PCM, regardless of whether
the audio output presetting is set to "normal" or "PCM". The signals are output with the same sampling
frequency as that of the music source.
• In general, the higher an MP3 file's bit rate, the better the sound quality. On the DVD-2910, we recommend
using MP3 files recorded with bit rates of 128 kbps or greater.
• MP3 files may not be played in the expected order, since the writing software may change the position of
the folders and the order of the files when writing them on the CD-R/RW.
• Programmed playback is not possible with MP3 discs.
• When writing MP3 files on CD-R/RW discs, select "ISO9660 level 1" as the writing software format. This
may not be possible with some types of writing software. For details, refer to the writing software's usage
instructions.
• The number of files playable with the DVD-2910 is approximately 600 or less.
• With the DVD-2910 it is possible to display folder names and file names on the screen like titles. The DVD-
2910 can display up to 8 characters, consisting of numbers, capital letters, and the "_" (underscore) mark.
• If recorded in a format other than "ISO9660 level 1", normal display and playback may not be possible. In
addition, folder and file names including other symbols will not be displayed properly.
• Be sure to add the extension ".MP3" to MP3 files. Files cannot be played if they have any extension other
than ".MP3" or if they have no extension. (with Macintosh computers, MP3 files can be played by adding
the extension ".MP3" after the file name consisting of up to 8 capital or numbers and recording the files
on the CD-R/RW.)
• Do not apply stickers, tape, etc., to either the label side or the signal side of CD-R/RW discs. If adhesive
gets on the surface of a disc, the disc may get stuck inside the DVD-2910 and be impossible to eject.
• The DVD-2910 is not compatible with packet write software.
• The DVD-2910 is not compatible with ID3-Tag.
• The DVD-2910 is not compatible with play lists.
• The DVD-2910 is not compatible with MP3 PRO.
• Do not play CD-R/RW discs containing any files other than music CD files (in CD-DA format), WMA, MP3
and JPEG files. Doing so may result in malfunction or damage, depending on the type of file.
36
D I SC I NFORMATI ON
ROOT
• •
0
F OL DER1
MP3 _ 0 1
1
F OL DE R 2
MP3 _ 0 2
2
F OL DE R 3
MP3 _ 0 3
3
F OL DE R 4
MP3 _ 0 4
4
F OL DE R 5
MP3 _ 0 5
5
PL AY MODE
FOL DER
S I NGL E ELAPSED
: - - : - -
SE L ECT :
DEC I S I ON : ENTER BUT TON
Remote control unit
PLAY
PLAY
Remote control unit
Main unit
Remote control unit
23

PLAYING WMA

Listening to WMA (Windows Media Audio) CD-R/CD-RW
2
• This unit can play CD-R/RW music files that have been recorded in the WMA (Windows Media Audio)* audio
compression format.
Windows Media and the Windows logo are trademarks, or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
WMA (Windows Media Audio): New audio coding of Microsoft Corporation.
Uses of recordings you have made other than for your personal enjoyment are not permitted under
the Copyright Law without permission of the copyright holder.
• The method of playback is the same as "Listening to Recorded MP3 CD/CD-R/CD-RW" on Page 35.
• In the file display of the disc information screen, WMA files will be displayed with the "WMA" icon instead
of the "MP3" icon. (Files for which the "WMA" icon is not displayed cannot be played. There will be a skip
and the next file with an icon will be played.)
NOTES:
• Files recorded with a sampling frequency (fs) of 44.1 and 48 kHz are supported.
• Programmed playback cannot be performed with WMA discs.
• The digital output at the time of WMA file playback is converted to PCM regardless of the initial settings.
• Please use discs that have been recorded in conformity with the ISO 9660 level 1/level 2 CD-ROM file
system. (Extended formats are excluded.)
• Copyright protected files cannot be played. Also note that depending on the writing software and
conditions, playback might not be possible, or the files might not be displayed properly.
• Playback of the CD-R/RW might not be possible depending on the disc characteristics, soiling, scratches,
and other factors.
• Bit rates of 64 k to 160 kbps are supported for WMA files that have an extension of ".wma" or ".WMA".
• This unit can display the folder names and file names on the screen. Up to 11 half-width alphanumeric
upper case characters and symbols (including the underscore symbol) can be displayed. Kanji, hiragana,
katakana and other characters cannot be displayed.
• While in the stop condition, the DISPLAY button of the remote control can be used to switch and display
the title names and the artist names. (One folder has a capacity of up to 99 files.)
• Recorded discs with no more than 99 files per folder are recommended. Multiple folder configurations are
possible; however, depending on the configuration, recognition and playback of all the folders and files
might not be possible.
• Multi-session discs can also be played back, however, playback of discs that have had session closure
within 10 sessions.
• Direct track selection using the remote control numerical keys (0 to 9, and +10) can specify up to 179
tracks (179 files) per folder. When 179 tracks are exceeded, while the unit is stopped, use the cursor
buttons at the disc information screen to select the files, and use the play button or the ENTER button to
play.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido