Sime MURELLE HE 70 R ErP Instrucciones Originales página 71

Type C (separate ø 80 flues)
TABLE OF LOAD LOSSES OF ACCESSORIES
.
.
90°.MF.polypropylene.curve.
45°.MF.polypropylene.curve.
Polypropylene.extension.L..1000.
Polypropylene.extension.L..500.
Coaxial.roof.exit.terminal.+.Fitting.(pos..10).
Roof.exit.terminal..L..1381.
Exhaust.terminal.
Air.inlet.terminal..
G
Polypropylene.extension.L..250.with.socket.
M
R
Coaxial.exhaust.L..885.+.Fitting.(pos..10).
STAFFA TELAIO
Condensation.recovery.L..135.
CALDAIA
KEY
. 1.. 90°.MF.polypropylene.curve.(6.pcs.).code.8077450
. 2.a. Polypropylene.extension.L..1000.(6.pcs.).code.8077351
. 2.b. Polypropylene.extension.L..500.(6.pcs.).code..8077350
. 3.. Hinged.tile.code.8091300
. 4.. Roof.terminal.kit.L..1381.code.8091204
. 4.a. Coaxial.roof.exit.terminal.code.8091205
. 5.. Polypropylene.extension.L..250.with.socket.code.6296513
. 6.. . 45°.MF.polypropylene.curve.(6.pcs.).code.8077451
. 7.. Exhaust.terminal.code.8089501
. 8.. Internal-external.ring.nut.kit.code.8091500
. 9.. Air.inlet.terminal.(supplied.with.unit)
. 1 0.. Inlet/exhaust.fitting.code.8091401
. 1 1.. Rubber.gasket.ø.80.(supplied.as.standard)
. 1 2.. Condensation.recovery.L..135.code.8092800
. 1 3.. Coaxial.exhaust.ø.80/125..L..885.code.8091210.
Load.loss
(mm.H O)
2
Inlet. Exhaust
0,80. 0,80
0,45. 0,45
0,35. 0,45
0,15. 0,20
-. 4,00
-. 1,30
-. 1,50
0,20. -
-. 0,10
-. 5,00
1,80. -
Pmin
Pmax
Type C (separate ø 80 flues and
coaxial exhaust terminal)
WARNING:
- Installations with roof exit terminal (4a) and coa-
xial exhaust (13) require the use of a condensation
recovery (12) that has to be connected to the water
drain siphon (waste water).
- The installation of the roof exit terminal (4a) requi-
res the removal of the two ø 60 and ø 100 reducers.
- Before installing accessories, lubricate the internal
part of gaskets with silicon-based products. Avoid
using oils and greases.
ES
PT
ENG
Fig..7
71