Yamaha E8D Manual Del Propietário página 146

8
9.9/15
4-20
All manuals and user guides at all-guides.com
EMU00396
Installing the Propeller
cC
8 Be sure to install the thrust washer
8 Be sure to use a new cotter pin and
1) Apply Yamaha Marine grease or a cor-
2) Install the thrust washer and propeller
3) Install the washer and tighten the pro-
602063
4) Align the propeller nut with the propeller
NOTE:
When the propeller nut does not align with
the propeller shaft hole after tightening to
602053
the specified torque, then tighten the nut
further to align it with the hole.
before installing the propeller, other-
wise the lower case and propeller boss
may be damaged.
bend the ends
Otherwise the propeller could come off
during operation and be lost.
rosion resistant grease to the propeller-
shaft.
on the propeller-shaft.
peller nut to the specified torque.
Tightening torque:
Refer to "SPECIFICATIONS" page 4-1.
shaft hole. Insert a new cotter pin in the
hole and bend the cotter pin ends.
E
over securely.