System Settings; Acoustic Signal - Mettler Toledo SevenGo pro Instrucciones De Montaje

The endpointed reading can only be stored once. When the data is stored, Store disappears from the
measurement screen.
3. Timed interval readings
A reading is stored to memory every time after a certain interval (3 – 9999 s) defined in the menu has
elapsed. When working in the timed-interval reading mode, the interval by can be defined by entering the
seconds. The measurement series stops according to the selected endpoint format or manually by
pressing READ. When timed-interval reading is "on", the DL icon
For readings lasting longer than 15 minutes, switch off the auto-shutoff function. The Auto-off override icon
appears on the display.

5.5 System settings

Note
The system settings menu is protected by a PIN. Upon delivery, the PIN is set to 000000 and is activated.
Please change the PIN to prevent unauthorized access.
Language
The following languages are available for the system: English, German, French, Spanish, Italian, Portuguese,
Chinese, Japanese, Korean and Russian.
Time and date
Time
Two time display formats are available:
24-hour format (for example, 06:56 and 18:56)
12-hour format (for example, 06:56 AM and 06:56 PM)
Date
Four date display formats are available:
28-11-2010 (day-month-year)
28-Nov-2010 (day-month-year)
28/11/2010 (day-month-year)
11-28-2010 (month-day-year)
Access control
System settings
PIN settings are available for:
System settings
Deleting data
Instrument login
To enter the PIN, proceed as follows:
1 Switch PIN protection for the required access control ON. The window for entering an alphanumeric PIN
appears.
2 Enter an alphanumeric PIN (max. 6 characters).
The input window for PIN verification appears.
3 Confirm PIN.
A maximum of 6 characters can be entered as PIN. In the factory default settings, the PIN for system settings
and deleting data is set to 000000 and is activated, no instrument login password is set.

Acoustic signal

An acoustic signal can be switched on in the following three cases:
Key is pressed
Alarm/warning message appears
Measurement is stable and has endpointed (stability signal appears)
SevenGo (Duo) pro™/OptiOx™
appears.
Setup​ ​ 19