Mettler Toledo SevenGo pro Instrucciones De Montaje página 32

Eliminate mistakes!
After connecting an ISM
Additional features are described below.
Initial calibration data for pH (only SG98)
®
When an ISM
following data is included:
Response time
Temperature tolerance
Membrane resistance
Slope (at pH 7) and offset
Type (and name) of electrode (for example, InLab
Serial number (SN) and ordering (ME) number
Production date
Calibration history
The last 5 calibrations data stored in ISM
Maximum temperature
The maximum temperature that the ISM
automatically and can be reviewed for the evaluation of the electrode lifetime.
Sensor cap life
The date of first use of the optical DO sensor cap and the expiration date in UTC (universal time coordinated)
can be reviewed. Once the first measurement is taken with the sensor cap, an internal clock starts counting
down and the cap needs to be replaced after 12 months.
®
Reset ISM
The calibration history in this menu can be deleted. This menu is protected by a deletion PIN. Upon delivery,
the PIN for deletion is set to 000000. Change the PIN to prevent unauthorized access.
28 Data management​ ​
®
sensor, the last set of calibration data is automatically used for measurements.
sensor is connected, the initial calibration data in the sensor can be reviewed or transferred. The
®
®
sensor has been exposed to during measurement is monitored
®
Expert Pro ISM)
sensor including current calibration can be reviewed.
SevenGo (Duo) pro™/OptiOx™