TM 514 – COMMON RAIL TEST
Produzido por Tecnomotor Eletrônica do Brasil S/A - REPRODUÇÃO PROIBIDA - Eventuais erros ou defeitos favor comunicar tecnomotor@tecnomotor.com.br
Measurement of the pressure regulating valve curve
With this information, the user can detect a problem in valve operation and can
more easily isolate the defect.
Pressure curve measurement of pressure sensors
For pressure sensor tests, data such as pressure curve x sensor voltage
measurements are provided.
Operation cycles can be either manual or automatic, so you can choose a
specific, custom test or let the equipment perform all the necessary tests.
Important observations:
During the execution of the work should not move the unit or leave it on an
inclined plane, which could affect the results.
Place a mat under the equipment, for splash or leak fluid can make some
types of slippery floor, facilitating accidents.
Tecnomotor is not responsible for uses other than those specified, so it is
important that the equipment is used by properly trained people and
according to the specifications contained in this manual.
The purpose of this manual is to provide the user with basic information
about the use of the equipment.
171