inbody 570 Manual De Instrucciones página 15

3. Blood Pressure Monitor
If a blood pressure monitor is connected to the InBody570, the blood pressure values measured by the blood
pressure monitor will be sent directly to the InBody570.
* Always connect a blood pressure monitor from InBody.
* If you select to print blood pressure measurements under Settings of the Administrator Menu '13. Outputs/Interpretations for Results
Sheet', the blood pressure measurements will be printed on the InBody Results Sheet.
1) First turn off the InBody570 and then the blood pressure monitor.
* You may experience connection issues in connecting the blood pressure monitor to the InBody570 if the InBody is turned on.
2) Plug the serial cable provided with the blood pressure monitor to the 9-pin blood pressure monitor serial
port on the rear panel of the InBody570.
3) Turn on the blood pressure monitor.
4) Turn on the InBody570. If the blood pressure monitor is connected to the InBody570, the blood pressure
monitor icon (
4. Barcode Reader
If a barcode reader is connected to the InBody570, the ID will be inputted automatically.
4
* If the InBody cannot recognize the barcode reader, please contact InBody.
1) First turn off the InBody570.
* You may experience connection issues in connecting the barcode reader to the InBody570 if the InBody is turned on.
2) Plug the USB cable of the barcode reader into the USB HOST port on the rear panel of the InBody570.
3) Turn on the InBody570. If the barcode reader is connected to the InBody570, the barcode reader icon(
will appear on the top left corner of the screen when no one is on the footplate.
4
) will appear on the top left corner of the screen when no one is on the footplate.
4
4
9-pin blood pressure monitor
serial port
4
USB HOST port
4 4
)
15 15
EN
4