inbody 570 Manual De Instrucciones página 8

3. Level the InBody570 by rotating the leveling screws under the footplate to the left and right so that the
air bubble is centered.
* Leveling the equipment is necessary for accurate measurement of weight. There are a total of 5 leveling screws.
UTION NOTE DANGER
참 고 주 의
Avoid injuring your hands when rotating the leveling screws under the footplate.
•
4. Connect the adapter (
to the power cord (
* The InBody570 can be used in connection with other equipment such as a stadiometer, a blood pressure monitor, data management
software called LookinBody120, or a barcode reader. For more information, please refer to 'A. Exterior and Functions 3. Rear Panel'
in section 'V. Others' in this User's Manual.
UTION NOTE DANGER
참 고 주 의
• Do not place the InBody570 in a location making it difficult to disconnect the power cord.
• Do not plug in or pull out the power cord with wet hands. There is a risk of an electric shock.
• Always use an outlet connected to the power (AC 100 - 240 V). Using other power rated outlets may result in
fire or malfunction.
• When using a power surge protector, make sure that the outlet or the extension cable has adequate power capacity.
Do not disassemble or modify the equipment including internal parts without written consent from the
•
manufacturer. This may cause electric shock or injury, product malfunction, inaccurate results, and will
void the manufacturer's warranty.
• Do not directly contact the InBody570 with any other electronic device when the InBody570 is on. This may
result in an electric shock.
8 8
Leveling screws under the footplate
Leveling screws under the footplate
Caution
참 조 주 의
) to the power input port, which is located on the rear panel (
❷
). Plug the power cord (
❸
❶
Rear panel
Warning
참 조 주 의
Level Indicator
Leveled
) into a grounded 3-socket outlet.
❸
Power input port
❷
❸
Not leveled
). Connect the adapter (
❶
Grounded outlet
3-socket outlet
)
❷