Transportation And Storage; Cautions During Transportation; Repacking Instructions; Transportation And Storage Environment - inbody 570 Manual De Instrucciones

III. Transportation and Storage
A. Cautions during Transportation
When transporting, have two people keep the InBody570 parallel to the ground.
B. Repacking Instructions
Once the InBody570 is installed, avoid transporting the equipment. If it must be transported, repack it in
the following sequence.
1. Turn off the InBody570.
2. Separate the connected adapter, cords, and cables from the equipment, and cover the InBody570 with
the polyethylene foam cover. After covering the InBody, lower the upper part.
3. Put the InBody into the packing box. Place the packing pad over the equipment and tape up the
packing box.
CAUTION NOTE
참 고 주 의
• Always use the protective packing materials provided by InBody when repacking.
C. Transportation and Storage Environment
The InBody570 should be transported or stored under the following conditions.
20 20
Polyethylene foam cover
Polyethylene foam cover
DANGER
Caution
참 조 주 의
Temperature range
Relative humidity
Atmospheric pressure
재포장
-10 ~ 70°C (14 ~ 158°F)
10 ~ 80% RH (No Condensation)
50 ~ 106kPa
Packing pads