Height Adjustment; Securing Child - Joie signature i-Level Recline Manual De Instrucciones

Height Adjustment

for Head Support and Shoulder Harnesses
see images -
12 15
Check that shoulder harness straps are set at the proper height. please
choose the proper pair of shoulder harness slots according to the
child's height.
!
The bottom of headrest must be level with the highest point of
child's shoulder, it is shown as
13
!
If the shoulder harness straps are not at proper height, the child
might be ejected from the enhanced child restraint if there is a crash.
Squeeze the head support adjustment lever
push down the head support until it snaps into one of the 7 positions.
The head support positions are shown as
Adjust Backrest
see images -
16 17
There are 3 angles for the backrest.
Please press backrest adjustment button to heighten or lower the
backrest.
9
, but not above the shoulder line.
12
, meanwhile pull up or
14
15

Securing Child

Securing Child
in the Enhanced child restraint in the Infant Child Restraint
see images -
18 22
Note
After the child is placed in the seat, check if the shoulder
harnesses are set to the correct height.
1. While pressing the harness adjustment button, pull completely the
two shoulder harnesses of the infant carrier.
2. Unlock the buckle of the harnesses by pressing the red button.
3. Place child into the infant carrier and lock the buckle.
4. Tighten the shoulder harnesses by pulling adjustment webbing.
We recommend
using the full infant
insert while the
baby is under
60cm or until they
outgrow the insert.
Remove the body
portion of the
infant insert when
the infant's
shoulders no
longer fit
comfortably.
18
19
&
20 21
22
10