Astoria Storm SAEP Manual De Uso Y Mantenimiento página 58

Malfunctions and solutions
Problem
NO MACHINE
POWER
NO WATER IN THE
HEATING UNIT
TOO MUCH WATER IN
THE HEATING UNIT
STEAM NOZZLES
DO NOT RELEASE STEAM
STEAM NOZZLES RELEASE
WATER OR STEAM
MIXED WITH WATER
NO BEVERAGES ARE
BEING DISPENSED
WATER IS LEAKING
FROM THE MACHINE
THE COFFEE IS TOO HOT
OR TOO COLD
COFFEE DISPENSING
TOO FAST
COFFEE DISPENSING
TOO SLOWLY
THE COFFEE GROUNDS ARE WET
THE DISPLAY INDICATES
NON-COMPLIANT PRESSURE
COFFEE GROUNDS
FOUND IN CUPS
THE CUP IS DIRTY WITH
COFFEE SPLASHES
• THE COFFEE IS
NOT BEING DISPENSED
CORRECTLY
• THE COFFEE DOSE
IS NOT CORRECT
THE ELECTRONIC SYSTEM
HAS SHUTDOWN
WATER IS LEAKING
FROM THE PUMP
THE MOTOR STOPS
SUDDENLY OR THE THERMAL
PROTECTOR IS TRIGGERED
BY A POWER OVERLOAD
THE PUMP IS WORKING BELOW
THE NOMINAL FLOW RATE
THE PUMP IS NOISY
58 216
of
Cause
The machine is switched off.
The water mains valve is shut off.
Electrical system or hydraulic system fault.
• The nozzle sprayer is clogged.
• The machine is switched off.
Electrical system or hydraulic system fault.
• The water mains valve is shut off.
• The coffee has been ground too finely.
• The tray is not draining.
• The drain pipe is broken, has detached, or the
water flow is obstructed.
Electrical system or hydraulic system fault.
The coffee has been ground too coarsely.
The coffee has been ground too finely.
• The dispensing group is dirty.
• The dispensing group is too cold.
• The coffee has been ground too finely.
• The coffee is too old.
Hydraulic system fault.
• The filter holder is dirty.
• The filter holes are worn.
• The coffee has not been ground evenly.
• The coffee has been ground too coarsely.
• The filter's edge is damaged.
The coffee has been ground too finely.
Electrical system or hydraulic system fault.
Pump fault.
Pump fault.
Pump fault.
Pump fault.
Action
Turn on the machine.
Open the water mains valve.
Turn off the machine and call out the Technical.
• Clean the steam nozzle sprayer.
• Turn on the machine.
Turn off the machine and call out the Technical.
• Open the water mains valve.
• Adjust the coffee grinding.
• Check the sewer drain.
• Check and restore the drain pipe connection to the
tray.
Turn off the machine and call out the Technical.
Adjust the coffee grinding.
Adjust the coffee grinding.
• Wash the group with the blind filter.
• Wait for the group to fully heat up.
• Adjust the coffee grinding.
• Replace with fresh coffee.
Turn off the machine and call out the Technical.
• Clean the filter holder.
• Replace the filter.
• Adjust the grind as appropriate.
• Adjust the coffee grinding.
• Replace the filter.
Adjust the coffee grinding.
Turn off the machine and call out the Technical.
Turn off the machine and call out the Technical.
Turn off the machine and call out the Technical.
Turn off the machine and call out the Technical.
Turn off the machine and call out the Technical.
USER Manual