Costway SP37674 Manual Del Usuario página 10

(4)Take out the handlebar, align the three holes on the handlebar with the threaded holes
on the handlebar fixing part, place the flat washer, and insert the cylinder-head screw
(flat washer for the flat surface and arc-shaped flat washer for the arc surface) to lock it
with a wrench.
Set the removed handlebar cover to the position of handlebar as shown in the figure,
and align it with the 4 slots at the lower cover of the handlebar slide rail. Press slightly
down the handlebar cover and it will automatically be locked in place.
(5)Take out the digital display. 1. First remove the screws with an Allen wrench. 2. Take
out the back cover, insert the battery. 3. Use the screws just removed to align the holes
and fix them with an Allen wrench. 4. After the above steps, insert the sensor line into
the digital display.
09